Checklist · 11 min read · Updated 2026-10-04
How to Choose a 3D Projection Mapping Agency in India: Vendor Checklist
Hiring a 3D projection mapping agency? A step-by-step vetting process, the questions to ask, red-flag answers, and what a transparent quote should look like before you sign.
Quick answer
Choose a 3D projection mapping agency that owns permissions and training in-house, reports daily with geo-tagged proof, and gives an itemised quote that matches the rate-card structure below — not a single lump-sum figure. Run a paid pilot before any multi-city or annual contract.
Key takeaways
- In-house permissions, training and fabrication reduce handoff risk between vendors
- Demand daily, geo-tagged reporting — not a single report at campaign end
- An itemised quote should separate manpower, venue fees, fabrication, logistics and GST
- Start with a paid pilot before signing a national or annual contract
- Score every shortlisted agency against the same checklist, not against each other's pitch decks
Step by step
- 1
Share a written brief, not a conversation
Put the objective, cities, dates and budget range in writing before asking for a quote, so every agency is quoting against the same brief rather than against whatever it assumed you meant.
- 2
Score the quote on structure, not just the total
A credible quote breaks into manpower, venue/permission fees, fabrication, logistics and GST as separate lines — close to the breakdown in the worked example below. A single number with no structure is the most common way a quote looks cheaper than it actually is.
- 3
Verify who owns permissions
Ask whether Written consent from the building or surface owner for the projection and its timing is handled by the agency's own team or sub-contracted — sub-contracted approvals are where schedules slip.
- 4
Inspect the training and verification process
Ask to see a sample training deck and how identity verification is recorded for the people who will be deployed.
- 5
Confirm the reporting method before day one
Insist on geo-tagged, time-stamped photos and a daily dashboard, not a single wrap-up report at the end of the campaign.
- 6
Run a paid pilot
A 3-day pilot at one venue is enough to test attendance, reporting discipline and whether the quoted numbers hold on the ground. Treat the pilot itself as a vetting tool, not just a campaign — how it was run tells you more than the pitch did.
- 7
Lock escalation and replacement terms
Agree in writing what happens to billing and timelines if a promoter no-shows or a permission is delayed, before either happens. A vendor confident in its own operations will not resist writing this down; one that is not will ask to handle it "case by case" when it comes up.
Why the agency matters as much as the format
3D projection mapping turns a building facade, stage set or object into a screen by surveying its surface and mapping custom animated content exactly onto its contours, projected from high-lumen projectors positioned and calibrated for that specific surface. It is a visual spectacle format, used for a reveal, a festive moment or a stage backdrop where the surface itself becomes part of the content.
Choosing the wrong agency does not just raise cost — it changes whether 3D projection mapping works at all, because the format's results depend entirely on execution discipline that a brand cannot see from a deck.
Every item in the checklist below exists because it has gone wrong often enough to be worth checking in advance, not because it sounds thorough on a page.
The checklist
- Evidence of past execution in your category, not just a generic capability deck
- Coverage in your target cities (for example Mumbai, Delhi, Gurgaon, Noida, Bangalore, Hyderabad)
- In-house permissions and liaison team, not a sub-contracted one
- In-house or owned fabrication, with a prototype sign-off step before a full production run
- Trained, identity-verified manpower with attendance tracked against a roster
- Live dashboards with geo-tagged photo proof, available daily, not only at campaign close
- An itemised, transparent quotation with GST shown separately
- A clear escalation and replacement plan for no-shows and delayed permissions
- Written terms on who owns the captured lead data
- Willingness to run a paid pilot before a multi-city contract
How to score competing proposals against this list
Scoring every agency against the same ten-point list, rather than against each other's pitch decks, is what keeps the comparison fair.
A simple yes/no/partial score against each line, totalled across two or three shortlisted vendors, turns an impression-based decision into one that can be defended afterwards if the choice is ever questioned.
Questions to ask, and the answer that should worry you
Each of these is a direct question with a yes-or-no answer. A vendor that needs several sentences to answer a yes-or-no question is usually telling you the answer is no.
| Question to ask | Red-flag answer |
|---|---|
| Can I see last week's geo-tagged reports from a live campaign? | "We'll send a summary at the end" — reporting only at close hides a shortfall until it is too late to fix |
| Who files the Written consent from the building or surface owner for the projection and its timing and whose name is on it? | A vague answer about a "local partner" rather than a named internal owner |
| What happens if a promoter doesn't show up? | No mention of bench strength or a same-day replacement process |
| Can the quote be broken into manpower, venue, fabrication and GST? | A single total with no breakup, or a breakup offered only after you push |
| Who owns the lead data captured on ground? | No written answer, or an assumption that the agency retains it |
| Do you have a team already based in my target cities, or will one travel in? | An answer that avoids naming a local team, local rates or local permission contacts |
| What is the replacement turnaround for damaged or lost fabrication? | No defined turnaround, or a cost that shifts to you without prior agreement |
Red flags
Any one of these is worth a direct follow-up question; two or more together are worth walking away from the quote entirely.
- Animating content against an approximate render instead of a verified 3D survey, so it visibly misaligns on the real surface
- Projector throw distance or brightness not tested against actual ambient light at the display time
- Surface-owner consent covering the building but not the display's specific timing
- No calibration pass after rigging, assuming the survey alone guarantees alignment
- Content built without sync points for the show's music or lighting cues
- Reluctance to put any of the answers above in writing
- A price unusually lower than every other quote with no explanation for the gap
What a transparent quote looks like
If a vendor's quote cannot be broken down into something close to this, treat that as the red flag it is.
The structure matters more than the total — two vendors can quote within a few percent of each other on the bottom line while one of them is quietly short on manpower days or has folded the permission fee into the fabrication line, which only becomes visible once the quote is forced into this shape.
3-day pilot at a corporate park
5 technicians, 1 supervisor and 2 security guards, mid-band venue fee, 3 days.
- Venue & permission fee
- ₹90,000
- Manpower
- ₹50,700
- Subtotal
- ₹1,40,700
- GST (18%)
- ₹25,326
Total: ₹1,66,026. If every number above is visible on the quote, the vendor is pricing transparently; if only the total is visible, it is not.
Checking references and past work
A capability deck proves nothing that a short phone call cannot disprove.
Ask for two references from campaigns in your category or your cities and call them rather than emailing, before signing anything beyond a pilot.
- Ask the reference how much notice the agency needed for a last-minute venue change
- Ask whether the numbers in the final report matched what the reference's own team saw on the ground
- Ask how a no-show or a permission delay was actually handled, not how the agency says it is supposed to be handled
- Ask whether the reference would hire the same agency again for a second campaign without hesitation
Compliance the agency should own
A capable 3D projection mapping agency carries these without being asked twice.
If any of the items below are missing from a proposal, assume they have been quietly left for you to arrange, and price that risk into the comparison between vendors.
- Written consent from the building or surface owner for the projection and its timing
- Light-spill and display timing restrictions observed, particularly for residential-adjacent surfaces
- Structural and electrical safety sign-off for the projector rig and any scaffolding or lift used
- Municipal or local permission where the display runs in a public or civic space
Timeline promises worth checking
A vendor's timeline promise is easy to check against the lead times this format actually needs, and it is worth doing before signing rather than after a missed date.
| Promise made | Reality check |
|---|---|
| "We can go live tomorrow" | Permissions alone typically need 3–15 working days — a same-day promise either skips a step or relies on an approval already in hand that was not disclosed |
| "Fabrication will be ready in two days" | Custom fabrication typically needs 10–25 working days — a much faster promise usually means a stock design is being reused, which may or may not be what was briefed |
| "We can be in ten cities by next week" | A regional rollout typically needs 14–21 working days — a faster promise is worth asking to see the actual roster and permission plan behind it |
Before you sign a national contract
The gap between a confident pitch and a reliable vendor only shows up once money and a real deadline are involved.
A paid single-city pilot is the cheapest insurance against discovering that gap on a national contract instead.
Pilot first, scale second
A 5–10 working-day pilot costs a fraction of a national rollout and exposes exactly the gaps — attendance, reporting discipline, permission turnaround — that a pitch deck cannot.
A 3D projection mapping vendor who cannot produce yesterday's geo-tagged photo cannot be trusted to produce next week's result.
Planning 3D projection mapping?
Get an itemised plan and quote from BTL Marketing Co. within 24 hours.
Frequently asked questions
How much does 3D projection mapping cost in India?+
Indicative pricing is ₹3L – ₹60L per show. The final quote moves with the cities chosen, the number of days, team size, fabrication and the permissions each venue needs, so ask for an itemised breakup rather than one lump-sum figure.
How quickly can 3D projection mapping go live?+
A single-city pilot can go live in 5–10 working days. A regional rollout across several cities typically needs 14–21 working days once permissions and fabrication are built into the schedule.
Which Indian cities can run 3D projection mapping?+
3D Projection Mapping can be planned in any of India's 70 tracked cities, including Mumbai, Delhi, Gurgaon, Noida, Bangalore, Hyderabad, with tier 2 towns quoted on request.
Why does the surface need to be surveyed before content is made?+
Because the content is animated to match the surface's exact contours, windows and edges, and an approximate model produces content that visibly misaligns on the real building. The survey has to happen first; the animation is built against it, not the other way round.
What determines whether a surface can carry projection mapping well?+
Projector throw distance, ambient light at display time, and how much texture or detail the surface itself has to work with. A survey and feasibility check happen before any content is commissioned, since not every surface is a good candidate.
Does the display need the building or surface owner's permission?+
Yes, in writing, covering both the projection itself and its specific timing, since light-spill and display-hours restrictions are common, particularly near residential surfaces. Consent for the building is not the same as consent for a specific display window.
What should a 3D projection mapping pilot cost, roughly?+
For the configuration used throughout this checklist — 5 technicians, 1 supervisor and 2 security guards over 3 days at a corporate park — expect about ₹1,66,026 including GST; a quote far outside that range for a comparable brief is worth asking about directly rather than assuming it is simply a better or worse deal.
Should the cheapest quote automatically be rejected?+
Not automatically, but it should be checked harder than the others. Ask the cheapest vendor to walk through the same breakup everyone else gave — if the gap is a thinner team, a smaller venue or less experienced staff, that is a legitimate trade-off to decide on; if nobody can explain the gap, treat it as the red flag it is.
How many agencies should be shortlisted before deciding?+
Two or three with a real written quote each is usually enough to see whether a price or a promise is normal for the brief or an outlier. Shortlisting more than that mostly adds time to the decision without adding much new information, once the same ten-point checklist is applied consistently.
What should be in writing before the first payment is made?+
The scope, the itemised quote, the escalation and replacement terms, the reporting method and frequency, and who owns the captured lead data — in that order of priority if the contract has to be trimmed for time. Anything agreed only verbally at this stage tends to be remembered differently by both sides once a dispute actually happens.
3D Projection Mapping in top cities
More on 3D projection mapping
- 3D Projection Mapping Cost in India: Price Guide & Budget Breakdown
- How to Plan a 3D Projection Mapping Campaign: Step-by-Step Guide
- 3D Projection Mapping Ideas That Drive Sales: Proven Formats
- 3D Projection Mapping vs Digital Ads: Which Delivers Better ROI?
- 3D Projection Mapping for Consumer Brands: The Complete Playbook
- Measuring 3D Projection Mapping ROI: Formula, Attribution & Worked Example